Dali oil filter oil filter element membrane filter element

Darlly oil filter oil filter element membrane filter cartridgeGeneral  Description:MFF Series Pleated Filter cartridges are manufactured to exact standards and are used in the most demanding industrial environments. Manufactured in a range of length options and micron ratings. Media has a fixed pore construction of hig

Featured Products

Darlly oil filter oil filter element membrane filter cartridge
Darlly Oil Filter Oil Filter Element Membrane Filter Cartridge
General  Description:
MFF Series Pleated Filter cartridges are manufactured to exact standards and are used in the most demanding industrial environments. Manufactured in a range of length options and micron ratings. Media has a fixed pore construction of high quality fibers. The combination of surface and depth filtration provides a long lifetime. Due to use of the premium quality filter fabrics, the pleated filter cartridges have superior flow characteristics with very low pressure drop compared to depth media of similar micron rating. Due to large filter area and design, allow the use of a reduced number of cartridges. Your advantage is a smaller filter vessel, less footprint and lower capital investments. The pleated cartridges have a very large filtration area and therefore a very high dirt-holding capacity. Long cartridge lifetime means lower operational consumable costs, Less work changing the cartridges and less waste.

Applications:
Darlly Oil Filter Oil Filter Element Membrane Filter Cartridge


Features:
Large filter area and depth filtration provides a long lifetime of pleated filter cartridge.
- Low cost because of large filter area and reduces labor costs to change 
Darlly Oil Filter Oil Filter Element Membrane Filter Cartridge


Specifications:

Dimensions

- Outside Diameter:69mm
- Inside Diameter:28mm
- Length:10",20",30",40"

Material Of Constructions
- Filter Media: PP,PET, Glass Fiber
- End Cap Material: PP , ABS
- Center Core: PP, ABS
- Netting: PE
- Seal Material: Silicone, EPDM, NBR, VitonEnd Cap Types:DOE,-226/Flat End

Performance
- Removal Rating: 1μm,2μm,5μm,10μm,20μm,50μm
- Operating Pressure and temperature:
- The pleated cartridge construction will withstand differential
- Pressures up to 60 PSI(4Bar) at ambient temperature.
- The optimum changeout differential pressure is 35psi(2.5Bar) up to 
52° C.
- Service condition:
- 500KPa(5Bar)by 
20° C
- 300KPa(3Bar)by 65° C
Code*Removal RatingCode=LengthCode# MediaCode+Seal MaterialCode&Code
11µm1010"PPPolypropyleneSSiliconeFDOE
22µm2020"GFGlass FiberEEPDMT222/Flat End
55µm3030"PETPolyesterBNBR  
1010µm4040"  VViton  
2020µm        
5050µm        

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours